EN10216-5 TC1 CFD Stainless Steel Tube

Introduction

EN10216-5 TC1 CFD Stainless Steel Tube is a long steel tube with a hollow cross-section and no peripheral joints. It has a lower gloss and a thicker wall thickness. It is manufactured by hot rolling, hot extrusion or cold drawing processes. CFD tube refers to cold worked heat treated and descaled tubes, which can have an off-white surface, which is the colour of the pickling process, unlike CFA tubes.

EN10216-5 TC1 CFD Stainless Steel Tube is a steel tube resistant to corrosion by weak corrosive media such as air, steam, water and chemically leaching media such as acids, alkalis and salts. It demonstrates its superiority in high-pressure, high-strength, mechanical structural materials. Our EN10216-5 TC1 CFD Stainless Steel Tube has good rust resistance, wear resistance and impact resistance, and can be used for a long time.

Parameter

Materials: 1.4301, 1.4306, 1.4401, 1.4404, 1.4833, 1.4845, 1.4571, 1.4438, 1.4541, 1.4550, 1.4539, 1.4362, 1.4462, 1.4410, 1.4501 and so on.

Similar Standards: ASTM A213, ASME SA213, ASTM B163, ASME SB163, JIS G3463, DIN17458

Specification: OD 6.35mm to 508mm; WT 0.6mm to 30mm; Length Max 25m.

Tests: all products should be hydrostatically tested, non-destructive tested (ET and/or UT).

The following information shall be supplied by the purchaser at the time of inquiry and order:

a) quantity (mass or total length or number);

b) term "tube";

c) dimensions (outside diameter D and wall thickness T);

d) designation of the steel grade according to this part of EN 10216;

e) test category.

2 000 m of cold finished descaled seamless tube with an outside diameter of 168,3 mm, a wall thickness of 4,5 mm, in accordance with this part of EN 10216, tolerance classes D 3 and T 3, made of steel grade X2CrNi19-11, to test category 1, with a 3.1 inspection certificate in accordance with EN 10204:

EXAMPLE 2 000 m - CFD Tube – 168,3 X 4,5 - EN 10216-5 - X2CrNi19-11 - TC 1

Except for austenitic, there are some duplex stainless steel materials in this standard that could be chosen as follows:

The properties of duplex stainless steel material are as following,

Part of the difference between TC 1 and TC 2 (No need to do UT test by TC1)

Hot Tags: en10216-5 tc1 cfd stainless steel tube, China, suppliers, manufacturers, factory, wholesale, for sale, TP317L 1 4438 Stainless Steel Tube, Stainless Steel Bended U Tube, Stainless Steel Tube For Heat Exchanger, TP316Ti 1 4571 Stainless Steel Tube, GOST9941 Russia Stardard Stainless Steel Tube, Stainless Steel Tube For Boiler